Category: Updates

Taking back Program Controls : For the Beginners!

Paul1 Reply

Graph of typical Operating System placement on...
Image via Wikipedia

So, let’s face it, this is one of the most annoying problems there are with programs.   Programs that you think are shut down but are actually still active in the Taskmanager.  So I figured I’d talk about some of the most common fixes for these problems.    Now as you know there can be any number of programs or glitches as they say, causing the problems.  So let’s talk about the why, shall we.

Most of the time programs don’t quit because they are waiting for some kind of response from the system or the System is waiting for the program to close by itself.  It could also be a problem with a Virus or Root kit?  How do you fix it?

Fixing the problem is somewhat just trial and Error.  It isn’t always the hardest thing to do but sometimes people overlook the easiest solutions.   So here are some easy ones:

  • Check to see if one of the Microsoft updates are causing the problem —  Sometimes you might not realize it, but having installed an update can cause problems like KB951748.  That one caused a major Headache for Zonealarm.  So it is wise to check each months updates when you start seeing problems, sometimes it could of been happening for a while but it can sometimes cause troubles.

  • Do a Hijackthis scan — Just in case it is virus this will tell you what programs might be the virus.  You will need to go Analyze the logs so go HijackThis Log Analysis Site 1 and HijackThis Log Analysis Site 2. Check the logs to see what viruses might be on your system.   Just Remember that if you delete something important to your system you will have to install the Operating System.

  • Boot into Safe Mode and Clean out your Prefetch Directory — Yes that is right, if you boot into Safe Mode and clean the cache you sometimes help fix problems.  You see most programs loaded in cache sometimes get corrupt and might cause problems.

  • Uninstall any programs that you think might problem —  This one is easily overlook because most people don’t realize that a program is loading up with your knowledge and might cause a variety of problems.  You can also check the Msconfig for that programs that might not need to be loaded up when you start windows.

These are just a few ways to fix the problem and I think if you do this most of your problems will go away.  There are of course other solutions depending on your system configuration.   As with any changes to your system, please talk to your computer care specialist if you have any questions.

Related articles

Limiting Use of Your Bandwidth!!

Paul

With the Recent Comcast deciding to declare how much of bandwidth you can use.  I decided to talk about how to limit your bandwidth.  So Here are some tips and tricks to get the most out of your bandwidth:

[ad]

Chapter 1 — Understanding your Wireless Router : This is a must.  This chapter talks about how to access your router and and how what is an IP!!

Chapter 2 — 10 Ways to keep your wireless router Secure — This one will help with those pesky neighbors who are leeching of your internet and Bandwidth!

Chapter 3

  • Turn off Auto Update to Unimportant programs : Having several programs checking for updates can start to add up.  Although this is a small amount of bandwidth.  It will give your that extra amount.

  • When not using your Internet turn off your Modem : This one is the most useful because when your not using your internet just turning off the modem will prevent you from using to much bandwidth.

  • Use a program like AppSnap to update your programs : Having told you that you should stop auto-updating on some of programs.  Here is how you can update manually.  This little program will check most of what you have installed on your system and will let you know which ones have available updates.  This should be done once a week or every other week!!

  • Use a Program like GoodSync to perform backups : Know that some people have backups in the cloud this will greatly reduce the amount of bandwidth your system will use to upload to the cloud.  Get an E3 Amazon account and use the program to back to E3.

  • By an External Backup Hard Drive : This option is also good for people who have the need for all the bandwidth possible.  Buying an external hard drive for use as backup is also a good idea so that way you don’t depend on your internet bandwidth.   Just remember when you do a backup take it off site just in case of a fire or earthquake or something like that.   Might be time to buy a Safety Deposit Box, and use that.

[ad]

In an Upcoming post I will be discussing the program or tools you need to  monitor your bandwidth!  This is going to be a must for thos who need to monitor you monthly bandwidth per month.  I will be looking into some of the options available to you for free.

PSP 3.80 and PS3 2.10 firmware updates now available

Paul

You knew they were coming, now PSP 3.80 and PS3 2.10 are out and ready to dance on your Sony console. That’s DivX and WMV video support with Blu-ray profile 1.1 now ready for your PS3 in addition to Internet radio and a few other goodies for your PSP. Now get to it Sony boy, you might want to call in sick to do it up right.

[Thanks to everyone who sent this in]
[Via Engadget]

I thought people would like to know to check for the updates!!

iPod classic May Have Battery Drain-o Bug

Paul

Today there was some buzz about a battery bug in the iPod classic. Since perceived bugs aren’t always universal, or even widespread, we like to wait a bit before sounding the alarm. Well, this afternoon, when I plugged in an iPod classic that I swore was close to fully charged and saw the “Please connect to a power source” error message you can see above, I decided to dig deeper.

Sure enough, many, many classic owners are experiencing troubles. On this Apple Support thread alone, 33 posts discuss the issue, with speculation about whether the cause is use of Cover Flow or even leaving the clock display on (for as long as it lasts) when music isn’t playing. Most people say the problem hit when they upgraded to 1.02, the supposed classic “fix.”

In my own circumstance, the cause couldn’t be Cover Flow, because I rarely use it. (Sorry Steve!) It could definitely be related to the 1.02 update, as I had no problems until I updated. If you haven’t updated to 1.02, you may want to hold off. If you have, some people recommend restarting it to get it out of its continuous battery-draining spin. Some people simply recommend taking it back to the Apple Store for a replacement.

And they say the I-Pod firmware update was needed. I’d hold off on updating your Classic till they fix the problem.