Category: Windows

Everything About Windows

Undeleting the Recycle Bin in Vista!!

Paul1 Reply

Having been using Windows Vista there are some things you must remember with Vista.  You can easily delete the recycle bin or even the Compuer icon with much thought.  I recently had a problem with that.  My son wanted to play on my computer and hit the delete key and hit enter.  So there I was without a recycle bin.  Thanks to a little figuring out, I’ve come to understand that it is just as easy to put back the icon.  Unlike Ubuntu and other linux distros if you delete the recycle bin, you have to go through some hoops.  I know I have used them in the past.  So let’s start out with what vista says when you try to delete the recycle bin.

[ad]

There it says you must go to the personalization menu to fix that.  Ok so I go there and then I would need to click this:

You would have to click on “Change Desktop Icons” and then you are almost home.  Here is where you have some choices.

[ad]

You will need to put a check mark in the “Recycle Bin” box and you are set to go off and do other wonderful stuff.  if you are like me and you want to have network icons and computer icons on your desktop well check those off too.  The Computer icon is useful if you need to get to the hard drive.  The network is useful if you want to get out to your local network. I should also mention the control panel, that can be useful from time to time so it is all about what you want to make space be like.  You want to have it neat and spacious then you wouldn’t want to clutter your desktop if you want several programs at your fingertips then yes do what you want.  I’ve recently discovered how useful it is to have a clean desktop.  Don’t know why but I’ve begun to work on keep my screen desktop organized.

[ad]

Vista and BSOD

Paul

I wanted to talk about Vista and the terrible BSOD scenarios that I have found around the network.  I also want to talk about them to a point.  So I went through and look and here is what I found:

[ad]

  • NVidia Graphics Drivers — That should be well fixed by now.  I  don’t have an NVidia Computer with Vista on it and can’t say one way or the other.  I do know that recently they added new graphics drivers for Vista and are out.   That alone should fix most of the problems.

Here are a few of them that I could find out lately.  Most of the Blue Screen of Deaths for VIsta should be over with.  Since the Release of Vista SP1, Microsoft has issued driver fixes and program compatibilities with that release.

[ad]

Running old programs on Vista (tips and tricks)

Paul

So We’ve talked about how to get Vista to shut down better.  So I thought we talk about getting Windows XP programs to run on Vista and be more stable.  You can do this with Windows XP, ME, 2000, NT,. and 95 programs.

[ad]

  • Run the program in compatibility mode — This is something Vista comes with now for running old programs in Vista. To do this you will have to do some minor things.  Go to where the program is and right click on the program.  Select properties>compatibility.  Select “Run this program in compatibility  mode for:” Select  windows Operating System that you think would work with the program.

  • Run the program as Administrator —  This is a really good tip and trick to sometimes get programs to run with vista.  It goes hand in hand with the last one.  Right click on the program and select “Run as Administrator”.  I find some old programs don’t know about the kernel protection in Vista and you need to give them permission to use the kernel for the program to work.

  • Give the program special access —  Yes this one takes a little skill but should fix some of the problems with vista and old programs.  Right click on program and select properties.  Select security, and then select the group you want to associate with it.  I always suggest putting it in the administrator group because of the problems with Vista and the kernel.

[ad]

These few tips and tricks will greatly increease the likely hood of a old program to run in Vista.  Now remember if you have a Vist x64 Version you might need to do the Run as Administrator more than not.  I am not sure why I just know it is sometimes required.  Let me know what other tips and tricks you use with Vista and I’ll be sure to pass them along!!

Tips and Tricks to Shut down Windows Vista!

Paul

Yes we will be talking about why Vista won’t shut down properly.  It is a common problem in all models.   It has been know to cause some issues with boot up.  In the past, Vista when you hit the shut down or you did the short cut Windows key>Right Three Times>Enter, it wouldn’t shut down instantly.  I’ve recently found out how to fix this problem and why it comes and goes.  Here are some great ways to get Vista to shut down properly

    • Boot into Safe Mode —  Yes booting into safe mode will fix the problem to a point.  Here is what you need to do at start up of computer.  Press F8 as soon as you see the screen flicker black and you will be given a choice.  Choose Safe Mode.  Once done booting into safe mode.  Log into you user name.  There you will want to check with Msconfig. Make sure you aren’t loading up anything that might stop shut down from happening.  Once done they do the shut down procedure.  By doing it in safe mode you have vista reset all procedures to shut down.  This sometimes resolves the issue.
    • Don’t Shut down Vista improperly — having seen this from time to time.  If you do a hard shutdown, which you drop power or remove the battery.  This has been know to cause a issue with shutting Vista down properly.  There seems to be a correlation with vista and hard shutdowns.  I do not know how or why, I just seen that with my current Vista machine.
    • Make sure you exit out of legacy programs before you shut down — legacy programs are programs that aren’t designed for vista but are designed for Windows XP, 2000, 3.1, 3.0.  I don’t recommend using programs that are designed for Windows NT and nothing else.  If it’s in the list when you buy a program.  NT and Vista are siblings, they both use the same kernel.  Microsoft has said that in the past and I believe it.  So it only comes with reason that NT programs can work with Vista.  I’ve not tried but I’d be willing to say it could be done.
    • Let it think about shutting down — I find if I tell it to shut down and walk away it will eventually shut down.  I think it has a long wait time before shutting down.  Some program has to time out before it can shut down, or it has to tell vista that it needs to unload a program from memory.
    • Try using the registry hack — I’ve not tried this one but some say they get Vista to shut down properly and quickly by cutting the wait time out protocol in the registry.  I’ve seen it done on some Windows XP, it will shut down almost instantly because it doesn’t wait for the program to say anything.  It forces the program to quit.  So it could very well help you with shutting down Vista if your in a hurry.  Also try this: Faster Shutdowns using the Run Dialog
    • Don’t put the computer in sleep mode — This is only good for those who have laptops.  It seems putting the system in sleep mode slows down Vista when you are ready to shut down.  It seems to have a conflict in the system and has been know to cause interference with other shutdown procedures, so I recommend if you are done with your system to either leave it on, or shut it down but not to put your system into hibernation.

If you follow these steps you will find that Vista stops having this shutdown issue.  I had the same problems as others but after doing these steps myself, I’ve found Vista to shutdown faster and quicker and not hang during shutdown.  If you have any other ideas feel free to email me or make a comment on how to get Vista to shutdown quicker. If you like what you’ve seen by all means click on one of my ads to show support to my site.

Network Connectivity and Vista’s TCP/IPV6

Paul1 Reply

So I’ve been having problems with Vista and Network Connectivity.  I’ve got a DSL modem that would from time to time just drop connection to the internet or at least I thought it was that.  So I’d check the modem everytime this happenes.  It would say I was connected to to the network but not be on internet.  I went searching and found this really good forum discussion on Verizon and DSL.  After reading all there was people were talking about the IPv6 protocol was the main culprit.  So I figured I’d see what happens when I disabled the IPv6 Protocol from my system.  It worked no more connectivity issues.

[ad]

How do I disable the IPv6 Protocol?

In order to fix this problem you have to do some simples steps.  Here is how I fixed it.   Right Click > Select “Network and Sharing Center” > “View Status” for either Wireless or LAN. > Properities

It will be here that you must do something important to get this to work right.  You will have to uncheck the  Internet Protocol Version 6 (TCP/IPv6).  If you have both wireless and Lan.  You will have to do it for both of them.  There must be a problem with IPv6 because after doing this my system hasn’t lost connectivity and this is wireless.  You should also reboot your system to make sure it takes into account.  Uncheck it then press ‘OK’ and reboot.  After that you will be smooth sailing.  Although this is easy it is essential to note not all DSL modems are the same and it can be several reasons why it would be doing that for you but for me.  It was the fact that IPv6 isn’t fully developed and from what I hear from people it won’t be available for several years so right now in time, it isn’t any thing I can use right now.

[ad]

When are they expect to start using IPv6?

According to all I hear in the nextr 5 to 10 years at the earliest but some people estimate longer more on the lines of 15 to 20 years.  It will take a lot of work to make it available to all.  It has to be part of the whole internet.  It will take millions of dollars for it to be deployed.  If you have any ideas on how to get this to work on vista.  Leave a comment to better help others figure how to fix this.