Category: How-to

Hulu United States Only — FAQ

Paul4 Replies

In a Comment on there Hulu Blog,

August 16th, 2008 at 08:52 AM Umm, when exactly did Hulu decide to shut its doors to everyone outside of America? The site’s title is “Watch your Favorites. Anytime. For Free”. I’m sorry Hulu, this is a complete lie, as anyone viewing your site outside of the US is banned from viewing your videos. All the time. So that you know, I intend on writing a letter to Joss Whedon asking that he pull his Dr Horrible’s Sing-Along Blog video from your network and redistribute it to a video site that isn’t run by people who embrace the philosophy “Defective By Design”. That way, the thousands of other people wanting to see this video, like me, don’t have to resort to downloading the thing via the piratebay.

Well, This is something I wanted to discuss for everyone who reads my blog why Hulu isn’t allowing anyone outside of America to see the videos.   It’s all have to do with there contracts they have with certain providers.

Let me explain it to you another way, Hulu is now being watch all over North America.  Hulu is obligated to make sure no one out side of the US can watch these movies because they have “NO RIGHTS” to share this with anyone out side of the US.  When Hulu makes deals with these major distributors, they sign a contract.  In the contract somewhere at sometime, they are explicitly forbidden to stream this material outside of the US.

Is there ways around this?

Having experience in the computer repair and understand of what is required for someone to get around this type of “Protection” is somewhat hard.  Here is the reason, when Hulu banned people from watching outside of the US they did so by banning a group of Internet Protocols.

Here are Three ways at which I know you can watch HULU programming.  Be advised that these are ways to get around the protection and by doing this, You hold me not responsible for any and all actions.  I talk about this because it would be unfair not to, I’ve got to have some responsibility to my readers.

  • USE A PROXY Server in the United States —  Now this one is the hardest because I don’t know of any.  I am not going to do your homework for you, but I will say there has to be several in the US.  Be Warned that using this will greatly reduce quality and speed.  You will sooner or later be found out and blocked, so use this one is at your own risk.

  • Ask Major Media Distributors to join HULU — Writing to them and asking them to join Hulu will increase the likely hood of them opening up the resources to let people view outside of HULU.  You see the other distributors have the rights to distribute outside of the US.  If you get them to come to Hulu, you will be giving them the power to allow certain content to be streamed outside of HULU.  If you want to contact the distributors and ask them to join Hulu, by all means go through the IMDB and look for the distributors you want on HULU and find out how to email them or Snail Mail them!!

  • USE an VPN to Access HULU — This one is like Proxy Servers but this one is most often used by people who are traveling outside of the US.  That’s right if your company has a VPN inside of the US you can watch shows.  This too could get your IP banned from Hulu, although I tell you this for those business men and women who are traveling and live in the United States and Military people too.  Has all the same flaws as Proxy, will slow you down, and quality will take a hit also!!

These are just a few of the ways you could stream information from HULU but use at your own risk.  If you have any other comments to add just go ahead and add them.  I want to hear what people think or what they want me to talk about.

Running old programs on Vista (tips and tricks)

Paul

So We’ve talked about how to get Vista to shut down better.  So I thought we talk about getting Windows XP programs to run on Vista and be more stable.  You can do this with Windows XP, ME, 2000, NT,. and 95 programs.

[ad]

  • Run the program in compatibility mode — This is something Vista comes with now for running old programs in Vista. To do this you will have to do some minor things.  Go to where the program is and right click on the program.  Select properties>compatibility.  Select “Run this program in compatibility  mode for:” Select  windows Operating System that you think would work with the program.

  • Run the program as Administrator —  This is a really good tip and trick to sometimes get programs to run with vista.  It goes hand in hand with the last one.  Right click on the program and select “Run as Administrator”.  I find some old programs don’t know about the kernel protection in Vista and you need to give them permission to use the kernel for the program to work.

  • Give the program special access —  Yes this one takes a little skill but should fix some of the problems with vista and old programs.  Right click on program and select properties.  Select security, and then select the group you want to associate with it.  I always suggest putting it in the administrator group because of the problems with Vista and the kernel.

[ad]

These few tips and tricks will greatly increease the likely hood of a old program to run in Vista.  Now remember if you have a Vist x64 Version you might need to do the Run as Administrator more than not.  I am not sure why I just know it is sometimes required.  Let me know what other tips and tricks you use with Vista and I’ll be sure to pass them along!!

Tips and Tricks to Shut down Windows Vista!

Paul

Yes we will be talking about why Vista won’t shut down properly.  It is a common problem in all models.   It has been know to cause some issues with boot up.  In the past, Vista when you hit the shut down or you did the short cut Windows key>Right Three Times>Enter, it wouldn’t shut down instantly.  I’ve recently found out how to fix this problem and why it comes and goes.  Here are some great ways to get Vista to shut down properly

    • Boot into Safe Mode —  Yes booting into safe mode will fix the problem to a point.  Here is what you need to do at start up of computer.  Press F8 as soon as you see the screen flicker black and you will be given a choice.  Choose Safe Mode.  Once done booting into safe mode.  Log into you user name.  There you will want to check with Msconfig. Make sure you aren’t loading up anything that might stop shut down from happening.  Once done they do the shut down procedure.  By doing it in safe mode you have vista reset all procedures to shut down.  This sometimes resolves the issue.
    • Don’t Shut down Vista improperly — having seen this from time to time.  If you do a hard shutdown, which you drop power or remove the battery.  This has been know to cause a issue with shutting Vista down properly.  There seems to be a correlation with vista and hard shutdowns.  I do not know how or why, I just seen that with my current Vista machine.
    • Make sure you exit out of legacy programs before you shut down — legacy programs are programs that aren’t designed for vista but are designed for Windows XP, 2000, 3.1, 3.0.  I don’t recommend using programs that are designed for Windows NT and nothing else.  If it’s in the list when you buy a program.  NT and Vista are siblings, they both use the same kernel.  Microsoft has said that in the past and I believe it.  So it only comes with reason that NT programs can work with Vista.  I’ve not tried but I’d be willing to say it could be done.
    • Let it think about shutting down — I find if I tell it to shut down and walk away it will eventually shut down.  I think it has a long wait time before shutting down.  Some program has to time out before it can shut down, or it has to tell vista that it needs to unload a program from memory.
    • Try using the registry hack — I’ve not tried this one but some say they get Vista to shut down properly and quickly by cutting the wait time out protocol in the registry.  I’ve seen it done on some Windows XP, it will shut down almost instantly because it doesn’t wait for the program to say anything.  It forces the program to quit.  So it could very well help you with shutting down Vista if your in a hurry.  Also try this: Faster Shutdowns using the Run Dialog
    • Don’t put the computer in sleep mode — This is only good for those who have laptops.  It seems putting the system in sleep mode slows down Vista when you are ready to shut down.  It seems to have a conflict in the system and has been know to cause interference with other shutdown procedures, so I recommend if you are done with your system to either leave it on, or shut it down but not to put your system into hibernation.

If you follow these steps you will find that Vista stops having this shutdown issue.  I had the same problems as others but after doing these steps myself, I’ve found Vista to shutdown faster and quicker and not hang during shutdown.  If you have any other ideas feel free to email me or make a comment on how to get Vista to shutdown quicker. If you like what you’ve seen by all means click on one of my ads to show support to my site.

Record a Quality Podcast on the Cheap

Paul

MetaFilter founder Matt Haughey reveals his secret to recording the MeFi podcast between two Macs with simple software sans expensive hardware. Matt says:

I read a lot of podcast how-tos when I set out to do my own, and almost all of them are mired in technical details about microphone quality and USB vs. mixer board audio wankery. Most every tutorial about doing a podcast interview focuses way too much on studio-like sound quality achieved through your equipment instead of through software and a bit of clever thinking.

Matt’s trick is to record a Skype call on both ends separately, then combine the two audio tracks in Garageband to bypass any Skype sound quality problems. Genius! Hit the link to get the details.

How to record a kickass podcast between two macs—and cheap! [A Whole Lotta Nothing]

[Via LifeHacker]

Thought people would like to know how to record a podcast without having all the know how. Enjoy

Make Firefox more responsive!! (Tweak)

Paul

Type about:config into the Firefox address bar, and then filter by the following:

content.switch.threshold

Most likely the key doesn’t exist yet, so you’ll have to set it by right-clicking in the empty area and selecting New \ Integer. Use these values when prompted:

  • Key Name: content.switch.threshold
  • Key Value: 1000000

The default value is 750000, or 3/4 of a second. The more time that you tell Firefox to wait before resuming high priority mode, the more responsive the application will feel… but it will obviously take a little longer to load the pages. You could reverse this if you were more worried about speeding up page load time.

[Via How-to-geek]

I’ve had trouble with Firefox with non-responsive webpages this might actually help. Thought people would like this little tip!!