5 ways to improve your security with your Overdrive Pro (Virgin Mobile)!

My MiFi and My Newton – The Novatel MiFi 2200

 

The OverDrive Pro

After a long hard search for my old Mifi Device,  I recently had to buy the Overdrive Pro (Virgin Mobile) mifi Card.  So I went out to find a replacement for my card and came to this.  I must say that with it having the option to have a way to increase Signal strength on the Mifi card by buying antenna’s for it.  It is a good deal for me.   I had a simple time getting it to work other than having to call Virgin Mobile Broadband (877-877-8443).  I do however think you should update your card for more security and here are a few tips.

Open a web browser and go to http://192.168.0.1

Change The Default Password

Just by chance someone gets a hold of your password for your mifi card.   They then can log into and change anything they want.   So you should change the “admin” Password and possibly change the Wi-Fi Password as well.  You can do this by going to the Admin Setup Page on the Mifi Device.

Change the SSID

By default the SSID for the Overdrive card is OverDrive Pro.   You can leave it as it is but the problem with it is someone else might have the same exact SSID and you may accidentally give out your wifi password to a stranger.   It should be unique and unguessable to people.   This Also can be done in the Admin Setup Page.

Change your DNS

By default you are going to use Virgin Mobile/Sprint DNS servers.  They may not be as fast as other servers and thus you can get a little more speed from changing the DNS to something other than Virgin Mobile/Sprint DNS.   You do this by going into the Advanced Settings, Clicking the Router Tab and going into the LAN tab, Which is a separate tab from the top.  You would then need to change DNS MODE to manual and enter two different IPS.  See below for two suggestions.

Here are two that you can try and see which one works better for you.

Google DNS:  8.8.8.8 and 8.8.4.4

OpenDNS: 208.67.222.222 and 208.67.220.220

Don’t Display Wifi Password

This is another by default, it will display the password on the Mifi screen for any passer by to gain access to the network.   If you have limited amount Gigabytes to use, you may not want to share that with a stranger.   So by turning off the password no-one will have access to the mifi device without asking you first.  That can also be changed and updated on the Admin Setup Page.

Change your Wifi Password

Finally the last step I would recommend is to change your Wifi Password so no other Overdrive Pro can have that same password.   Again, it is possibility someone else might have that password so it is best not to keep it.   Create a new password you can remember but nothing that everyone used.   Just saying.   You can do this also by going to the Admin Setup Page.

With these simple steps your OverDrive Pro Mifi Card is much more secure and less likely for someone to gain access unintentionally.  So you can sit back and relax and have fun with your card and I hope you enjoy it as much as I did making this blog post.

Paul Sylvester